GRILLE & SURFACE MOUNT LIGHTS - Third Watch Public Safety Equipment

LEDQ -Swift 3.0 Fusion Frontier 3 Watt 6 LED Emergency Vehicle Grill Warning Light Head

$29.95

Welcome to the high performance Swift 3.0 Fusion Frontier 6 Grille Led surface mount LED light head. Using the state-of-the-art Gen 4 LED technology it illuminates a powerful ray of light, which can be seen in any direction even in clear daylight. Fully encapsulated and fully waterproof, all LED modules and flasher boards are epoxy coated, keeping it harmless from all weather conditions. Each LED unit uses six 3 watt LEDs with colors flashing simultaneous or alternating with 22 different patterns. They can be synchronized to work together with many other LED modules. The size of these light heads allows them to be mounted in several locations such as: grilles, bumpers, dash and deck.

Flash Patterns:

PA1. Quad Burst – Split

PA2. Quad Burst – All

PA3. Quad Burst – Alternating*

PA4. Quad – Split

PA5. Quad – All

PA6. Quad – Alternating*

PA7. Single – Split

PA8. Single – All

PA9. Single – Alternating*

PA10. Super Flash – Split

PA11. Super Flash – All

PA12. Super Flash – Alternating*

PA13. Quad/Single w/ Quad Burst – Split

PA14. Quad/Single w/ Quad Burst

PA15. Accelerator – Split

PA16. Accelerator – All

PA17. Express Flash

PA18. California Steady with Pulse

PA19. California Steady

PA20. Steady All

PA21. Cycle Flash – Split & All

PA22. Off

Generation 4 LED surface mount lighthead
Weather and vibration resistant
Self-contained 22 patterns
Alternating or simultaneous flashing
6 wires for simple set-up – 1 pos, 1 Neg, 1 sync, 1 pattern, 1 Hi-Low and 1 Cruise
Voltage: 12-24 VDC
6 3watt LED elements
Average current draw: 500mA@12.8 VDC
Max current draw: 700mA@12.8 VDC
5.1″ wide x 1.1″ high x 0.8″ deep
3 year manufacturer defect warranty

Swift 3.0 Fusion Frontier 3 Watt 6 LED Emergency Vehicle Grill Warning Light Head LEDQ

$29.95

Generation 4 LED surface mount lighthead
Weather and vibration resistant
Self-contained 22 patterns
Alternating or simultaneous flashing
6 wires for simple set-up – 1 pos, 1 Neg, 1 sync, 1 pattern, 1 Hi-Low and 1 Cruise
Voltage: 12-24 VDC
6 3watt LED elements
Average current draw: 500mA@12.8 VDC
Max current draw: 700mA@12.8 VDC
5.1″ wide x 1.1″ high x 0.8″ deep
3 year manufacturer defect warranty

SKU: A-1432

Welcome to the high performance Swift 3.0 Fusion Frontier 6 Grille Led surface mount LED light head. Using the state-of-the-art Gen 4 LED technology it illuminates a powerful ray of light, which can be seen in any direction even in clear daylight. Fully encapsulated and fully waterproof, all LED modules and flasher boards are epoxy coated, keeping it harmless from all weather conditions. Each LED unit uses six 3 watt LEDs with colors flashing simultaneous or alternating with 22 different patterns. They can be synchronized to work together with many other LED modules. The size of these light heads allows them to be mounted in several locations such as: grilles, bumpers, dash and deck.

Flash Patterns:

PA1. Quad Burst – Split

PA2. Quad Burst – All

PA3. Quad Burst – Alternating*

PA4. Quad – Split

PA5. Quad – All

PA6. Quad – Alternating*

PA7. Single – Split

PA8. Single – All

PA9. Single – Alternating*

PA10. Super Flash – Split

PA11. Super Flash – All

PA12. Super Flash – Alternating*

PA13. Quad/Single w/ Quad Burst – Split

PA14. Quad/Single w/ Quad Burst

PA15. Accelerator – Split

PA16. Accelerator – All

PA17. Express Flash

PA18. California Steady with Pulse

PA19. California Steady

PA20. Steady All

PA21. Cycle Flash – Split & All

PA22. Off

Generation 4 LED surface mount lighthead
Weather and vibration resistant
Self-contained 22 patterns
Alternating or simultaneous flashing
6 wires for simple set-up – 1 pos, 1 Neg, 1 sync, 1 pattern, 1 Hi-Low and 1 Cruise
Voltage: 12-24 VDC
6 3watt LED elements
Average current draw: 500mA@12.8 VDC
Max current draw: 700mA@12.8 VDC
5.1″ wide x 1.1″ high x 0.8″ deep
3 year manufacturer defect warranty

Priority 1 Series G2 T6 LED Grille Light

$0.00 - $30.00

Third Watch PSE Priority 1 Series lights are some of the brightest on the market with the G2 T6 you will not be disappointed. With it's this design and it's full metal body the G2 T6 can take a beating and keep on going!

12V DC
Super Bright 3 Watt LED's
23 flash patterns
4 wires, synchronized wire included
Metal Case
5.1" wide x 1.1" high x 0.8" deep
Water proof

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!

Priority 1 Series G1 T4 LED Grille Light

$26.00

Third Watch PSE Priority 1 Series lights are some of the brightest on the market with the G1 T4 you will not be disappointed. Don't let this lights size discourage you when activate it packs a punch and will fit virtually anywhere you choose!

12V DC
Super Bright 3 Watt LED's
23 flash patterns
4 wires, synchronized wire included
Metal Case
4" wide x 1.1" high x 0.8" deep
Water proof

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!

Super Bright 4 LED Grille Light ADSWLGLTW1

$44.00

The Super Bright 4 LED Grille Light is one of the brightest lights on the market at a great price. This light will make your vehicle one of the brightest emergency vehicles out there with out breaking you bank! With it's amazing warning power you can't go wrong with the Super Bright 4 LED Grille Light!

Dimensions: Length 4.25", Height 1.25", Depth 1"

Features:

Each light has four 1 watt Super Bright LED's
Durable Black Housing
Long Life-Span
Low in power consumption
Weather-proof
Has 22 flash patterns
Gen III LEDs

Flash Patterns

1. Quad Burst- Split

2. Quad Burst- All

3. Quad Burst- Alternating

4. Quad- Split

5. Quad- All

6. Quad- Alternating

7. Single- Split

8. Single- All

9. Single- Alternating

10. Super Flash- Split

11. Super Flash- All

12. Super Flash- Alternating

13.Quad/Single w/ Quad Burst- Split

14. Quad/Single w/ Quad Burst- All

15. Accelerator- Split

16. Accelerator- All

17.Express Flash

18. California Steady With Pulse

19. California Steady

20. Steady All

21. Cycle Flash- Split & All

22. Off

To select a flash pattern, apply

BLUE to BLACK wire:

- Less than 1 second for next pattern

- 3-5 seconds for steady burn

- More than 5 seconds to turn OFF

Abrams Flex 6 LED Grille Light Head

$48.00

The Abrams Flex 6 High Intensity 6 LED Light head is the most versatile emergency vehicle strobe warning light offered in the market. The unit is compactly sized and offers a super bright light output. This Flex light head is perfect to be used as grille lights, deck lights, on side view mirrors, bumpers, and various other applications. In addition to being composed of 7th Generation LED’s with Linear spreader optics lenses, having 30 selectable flash patterns, synchronization function between multiple units, TBT (Turn/Brake/Tail) Light Function, this LED light head insures to increase the visibility of all emergency response vehicles.

Interchangeable/Compatible with:

All automobiles and devices equipped with a 10 to 30 Volt DC power source.

Product Features:

• Each unit consists of 6, 3W 7th Generation high intensity LEDs.

• Built in flasher – no external flasher needed.

• 30 select-able flash combinations.

• Last pattern memory recall.

• Synchronization between multiple units and with other Abrams products such as Beacons, Dash Lights & Hideaways.

• TBT (Turn/Brake/Tail) Light Function.

• Versatile application with surface mounting design and internal mounting.

• Compactly sized to fit almost anywhere on the vehicle.

• Weatherproof ready for exterior mounting (not submersible).

• Built in heat sink.

• Black flange included for surface mounting.

Product Content:

• 1 x Flex 6 LED Light Head

• 1 x Black Flange

• 1 x Padded Gasket

• Screws

• Owner’s Manual

Specifications:

• Dimension: 3.87” L x 0.65” H x 0.97” D

• Input Current @ 12V/24V: 50mA – 360mA/25mA – 180mA

Whelen ION™

$150.00

Whelen Engineering ION Series Super-LED Light

ION shrugs off moisture, salt, chemicals and road vibration while providing added light for off-road vehicles, construction equipment, motorcycles, utility vehicles, marine and many other heavy-duty applications. Compact and versatile enough to mount in any small space on emergency and rescue equipment. ION is a super tough, ultra compact LED light that is perfect for mounting anywhere on your vehicle, inside or out.

Product Specs

Meets NFPA 1901, KKK1822F requirements
Super-tough, compact LED light
Single color models have 25 Scan-Lock™ flash patterns, while split colors offer 69 flash patterns to choose from
Universal mount includes combination permanent/pedestal, clip, edge mounts, double sided tape with a black housing
Synchronizable to other Whelen Synch products
Water-resistant design is perfect for inside or outside of your vehicle
Includes Pedestal/Clip Mounting bracket for easy installation on trunk lid or grille and 10' 4-wire pigtail
4"L x 1"W x 2"D

Super Slim TIR 4 LED Grille Lights (2 Grille Light Bundle)

$26.00

Package included:2X Ultra Slim 4 LED Car Strobe Flash Lights + 2X Protection Pad

Product Size:3.35*1.1*0.39inch

Color: Black Housing + Clear Lens

Voltage: 12V-24V

Current: 333 mA

Wattage: 12W( 3W/LED )

Number of LED: 4 X LED/Light

Cable Length: approx.75cm

Material: High Quality Aluminum Alloy Housing + PC Lens

Weight: 160g(2pcs)

Wires connection,Black for Negative, Red for Positive and Yellow for Brake Light Negative)

Features:

Newest 3rd Generation High Power strobe light, 2 times Brighter than before!

Ultra slim, super bright with surface mount.

Powered by 4 high intensity LEDs with optical lens.

Anti-collision, anti-dust and splash-proof.

18 different flashing patterns, Last pattern memory recall.

Low power consumption, quick instant start-up time.

No pollution, no noise, no electronic interference and more efficient.

PowerArc P6 Surface Mount Warning Light P6BG

$273.00

P6BG-[*]

Surface mounted pulsing LED warning light
Powder coated black aluminum guard
180 degs of light coverage
NFPA & SAE compliant
Amperage 1/2 Amp
Single and dual color
Independent dual row of LEDs
Steady state override feature on lower row
LED diode colors R,B,W,Y,G
Lens colors R,B,Y,G,C
Lens color will match LED colors unless indicated
Modular element for easy removal and service
NFPA upper and lower zone compliant
5 year warranty

Feniex Fusion 40 Degree LED Grille Light

$59.00 - $89.00

Feniex Fusion™ lights stand out– they are the brightest and most versatile in the industry. Fusion™ Surface Mount LEDs can be mounted anywhere on any emergency vehicle and are engineered for the best visibility possible: select 40° light spread for long-range visibility or 180° light spread for wide-angle visibility. Choose from a wide variety of single or dual colors and multiple mounting options. Complete the package by syncing the Fusion Surface Mounts with Fusion 1X and 2X deck/dash lights, T3, Wide-Lux and Cannon Hide-Aways.

SPECIFICATIONS

Input Voltage: 12 Volts DC
Current Draw: 0.75 Amps
Single Color: 6 High Power 4-Watt Cree LEDs
Cable Harness: 9 Inches
Made in the USA

INCLUDED

1x Fusion Surface Mount
1x Bezel
1x Gasket

PRODUCT DETAILS

5 year warranty
Available in red, blue, amber, or white with a clear lens
20 Flash Patterns
180° light spread
Capabilities: Stop/Tail/Turn, Dim Mode
Syncs with all Feniex Fusion Series light heads, T3s and Cannons
Meets or exceeds NFPA and KKK ambulance specifications
Made in the USA

Feniex Fusion 180 Degree LED Grille Light

$59.00 - $89.00

Feniex Fusion™ lights stand out– they are the brightest and most versatile in the industry. Fusion™ Surface Mount LEDs can be mounted anywhere on any emergency vehicle and are engineered for the best visibility possible: select 40° light spread for long-range visibility or 180° light spread for wide-angle visibility. Choose from a wide variety of single or dual colors and multiple mounting options. Complete the package by syncing the Fusion Surface Mounts with Fusion 1X and 2X deck/dash lights, T3, Wide-Lux and Cannon Hide-Aways.

SPECIFICATIONS

Input Voltage: 12 Volts DC
Current Draw: 0.75 Amps
Single Color: 6 High Power 4-Watt Cree LEDs
Cable Harness: 9 Inches
Made in the USA

INCLUDED

1x Fusion Surface Mount
1x Bezel
1x Gasket

PRODUCT DETAILS

5 year warranty
Available in red, blue, amber, or white with a clear lens
20 Flash Patterns
180° light spread
Capabilities: Stop/Tail/Turn, Dim Mode
Syncs with all Feniex Fusion Series light heads, T3s and Cannons
Meets or exceeds NFPA and KKK ambulance specifications
Made in the USA

BROOKING MINI STEALTH 6-DIODE MULTI-MOUNT LIGHTHEAD

$83.00

MINI STEALTH 6-DIODE MULTI-MOUNT LIGHTHEAD

The MS6BH multi - mount gives the user 3 different options for mounting:

Lip mount, no holes drilled mount on any surface with an exposed edge
Permanent mount
Super sticky adhesive pads

BROOKING WIDE ANGLE 6-DIODE MULTI-MOUNT LIGHTHEAD

$84.00

WIDE ANGLE 6-DIODE MULTI-MOUNT LIGHTHEAD

Brooking’s universal and affordable option to effective intersection lighting has arrived.

The adjustable swivel mount on the Mirror Mount version of our AL6 allows the wires to pass through the top of a bracket which is concealed by a screw-on cover. This results in an easy, clean looking installation under the side mirrors of most vehicles.

Though the AL6M is promoted as an affordable and universal option for side mirror mount, the applications are not limited to this area of the vehicle only.

Available Colors: Amber, Blue, Red and White (solid colors only at this time)

Brooking Industries TLED04B Surface Mount

$45.00

GENERAL SPECIFICATIONS

• Flash Patterns: 19

• Input Voltage: 11~30 Vdc

• Current Draw: 0.28A @ 12Vdc - 0.15A @ 24Vdc

• Sync: 15+ Units

• LED Count: 4

• Dimensions: 4.8"L X 1.6"H X 1.2"D

• Certificates: SAE J595, CA Title 13, E13, E13

BENEFITS

• Economical and reliable

• Black bezel included - chrome sold separate

LIFETIME LED LIGHTS DUAL COLOR DITCH LIGHT POD STROBE BLUE 48W

$65.00

Sold Individually Price is for 1 light

30w of White LED in a 30 degree spot pattern
18w of Blue LED in side shooting configuration
Blue can be changed from solid to strobe effect
Blue and White are controlled separately
Use of 2 switches is recommended
Used or emergency, tow, race, or just to be seen
Turning on and off cycles from strobe to solid patterns
Lifetime Warranty
4"wide x 3" tall x 3" deep
12v

These blue white strobe Pod lights are a perfect addition to any vehicle needing to be seen. The white spot light will help you see what is in front (or behind) you with ease. Using these on a plow truck, or tow truck will increase your safety. The flashing blue lights are a great way to add visibility to your car or truck. Watch the video below to see how great these lights are.

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Feniex WIDE LUX 7 X 3

$149.00

Choose the Wide-LUX™ 7x3 Series for the industry's boldest, most intense perimeter lighting in an ultra-compact, slim design. Ideal for fire and EMS vehicles. Our Wide-LUX™ technology features 'hourglass' optics, emitting powerful visibility from 180 degree viewing angles. Extremely functional and customizable, the Wide-LUX™ can be used as a brake-tail-turn, reverse, scene light or warning light.

SPECIFICATIONS

Cable Harness: 10 Inches
12 High-Power 4 Watt Cree LEDs
Input Voltage: 12 Volts DC
Current Draw 1 Amp
Made in the USA

INCLUDED

1x Wide-Lux w/Chrome Bezel
4x #6-32 x 3/16 inch screws
2x back bracket mounts
2x #10-24 x 1.0 inch bolts
2x #10-24 x 1.0 inch bolts
2x #6 x 0.5 inch screws
2x hex nuts
2x #10 flat washers

PRODUCT DETAILS

5 year warranty
Available in red, blue, amber, or white with a clear lens
20 Flash Patterns
180° light spread
Capabilities: Stop/Tail/Turn, Dim Mode
Syncs with all Feniex Fusion Series light heads, T3s and Cannons
Meets or exceeds NFPA and KKK ambulance specifications
Made in the USA

Instruction Manual

Feniex WIDE LUX 6 X 4

$159.00

Choose the Wide-LUX™ 6x4 Series for the industry's boldest, most intense perimeter lighting in an ultra-compact, slim design. Ideal for fire and EMS vehicles. Our Wide-LUX™ technology features hourglass optics, emitting powerful visibility from 180° viewing angles. Extremely functional and customizable, the Wide-LUX™ can be used as a brake-tail-turn, reverse, scene light or warning light. Available in red, blue, amber or white with a clear lens.

SPECIFICATIONS

Input Voltage: 12 Volts DC
Cable Harness: 10 Inches
Current Draw: 1.25 Amps
18 High Power 4-Watt Cree LEDs
Made in the USA

INCLUDED

1x Wide-Lux w/Chrome Bezel
4x #6-32 x 3/16 inch screws
2x back bracket mounts
2x #10-24 x 1.0 inch bolts
2x #6 x 0.5 inch screws
2x hex nuts
2x #10 flat washers

PRODUCT DETAILS

5 year warranty
Available in red, blue, amber, or white with a clear lens
180° light spread
20 flash patterns
Capabilities: stop/turn/tail and dim mode
Syncs with all Feniex Fusion lighting, T3s and Cannons
Meets or exceeds NFPA and KKK ambulance specifications
Made in the USA

Instruction Manual

Feniex WIDE LUX 9 X 7

$229.00

Choose the Wide-LUX™ 9x7 Series for the industry's boldest, most intense perimeter lighting in an ultra-compact, slim design. Ideal for fire and EMS vehicles. Our Wide-LUX™ technology features hourglass optics, emitting powerful visibility from 180° viewing angles. Extremely functional and customizable, the Wide-LUX™ can be used as a brake-tail-turn, reverse, scene light or warning light. Available in red, blue, amber or white with a clear lens.

SPECIFICATIONS

Input Voltage: 12 Volts DC
Cable Harness: 10 Inches
Current Draw: 1.5 Amps
36 High Power 4-Watt Cree LEDs
Made in the USA

INCLUDED

1x Wide-Lux w/Chrome Bezel
4x #6-32 x 3/16 inch screws
2x back bracket mounts
2x #10-24 x 1.0 inch bolts
2x #6 x 0.5 inch screws
2x hex nuts
2x #10 flat washers

PRODUCT DETAILS

5 year warranty
Available in red, blue, amber, or white with a clear lens
180° light spread
34 flash patterns
Capabilities: stop/turn/tail and dim mode
Syncs with all Feniex Fusion lighting, T3s and Cannons
Meets or exceeds NFPA and KKK ambulance specifications
Made in the USA

Instruction Manual

Whelen 600 Series Super-LED® Rota-Beam

$285.00

Whelen's 600 Series Rota-Beam features solid-state "rotating" technology, simulating the appearance of a rotating lighthead without any moving parts or motors for long-life reliability.

Rota-Beam™ Series Feature

Super-LED rotating light with no moving parts and no motors.

100% solid state.

Surface mount.

180 degree horizontal light spread.

14 Scan-Lock flash patterns.

SAE Class 1 Certified.

Models with clear or color lenses.

Lenses are hard coated to resist scratches, salt or chemical damage

and UV degradation.

Low current draw of 2.2 Amps.

Moisture and vibration resistant.

Optional Chrome or Black flanges

Five year HDP® Heavy-Duty Professional warranty.

Rota-Beam rotating lighthead dimensions:

4-3/16" (106mm) H x 6-9/16" (167mm) L x 3-7/16" D

This Product is built per order. Shipping may take a little longer than usual!

Whelen 900 Series Super-LED

$200.00

NOTE The Whelen Split Red/Blue, Split Red/Amber, and Split Red/Clear as "Made to Order" and once ordered, cannot be cancelled, returned, or exchanged for any reason.

Super-LED Linear lightheads feature new, patent-pending optics designed to provide greater light output that rivals strobe in intensity. Surface mounted lightheads are vibration, moisture and corrosion resistant for long-life, heavy-duty performance and retrofit existing lightheads. Now you can choose certified, legal lighting for fire service or emergency vehicles needing to meet critical specifications.

FEATURES

Patent pending optics outperform any other similar directional lighthead on the market today.
Comes standard with clear outer lens and your choice of LED color (colored lenses available separately, please contact us for ordering info)
Super-LED design features heavy-duty performance, vibration, moisture and corrosion resistance.
900 Series is available in a single or double row of Linear LED's.
Split Linear-LED models are available. 600/700 are side by side and 900 is over and under.
All lightheads furnished with 6"wire pigtail.
Optional ABS chrome-plated flange is available for all lightheads.
Ideal for applications requiring NFPA, SAE J595, SAE 2498, California Title 13 or KKK-A-1822E certifications.
All models are 12.8 VDC and the 600/700 Series draws under 1 amp average while the 900 Series draws under 2 amps average.
Five year HDP® Heavy-Duty Professional warranty.
Large size and a variety of housing and mounting options make these lightheads useful for a wide range of requirements.
Optional Mounting Flanges are purchased separately.
Surface mounted, rugged LED lightheads feature 14 flash patterns including steady burn (except brake/tail models).
Surface mounting of any of these lightheads requires only a 3/8" wire access hole and four self-tapping screws.
Large body panel cutouts are not required preventing damaging moisture build-up over the life of your vehicle. New spreader optics provides wider light distribution.

Priority 1 Series A3 Alpha LED Apparatus Light

$62.00

The Third Watch PSE Priority 1 A3 Alpha LED Apparatus Light is the newest addition to the Priority 1 Series. With it's new design it's on the top of the charts as one of the best! With it's many options you won't be disappointed. With 18 led there are a range of flash patterns that are just down right awesome!

Powered by 12V
18 Super Bright Gen 5th TIR 3-watt LEDs
30 available flash patterns
Built in sync functionality
Non-volatile memory recalls last flash pattern
Includes 1 foot of cable
Weather-proof housing
Dimensions: 7"L x 4.6"H x .75"D

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!

Priority 1 Series A4 Alpha LED Apparatus Light

$62.00

The Third Watch PSE Priority 1 Series A4 Alpha LED Apparatus Light is the younger brother to the A3 Alpha. All Alpha series lights are the newest to the Third Watch PSE Warning Product Line. With it's smaller and sleek design the A4 Alpha is perfect for the grill of an ambulance or fire truck or can go perfect on the side of the front bumpers of a fire truck or above the back wheel in between compartment doors. This light packs a punch when activated but is so versatile it can be mounted virtually any where!

Powered by 12V
12 Super Bright Gen 5TH TIR 3-watt LEDs
30 available flash patterns
Built in sync functionality
Non-volatile memory recalls last flash pattern
Includes 1 foot of cable
Weather-proof housing
Dimensions: 7.7"L x 3.7"H x .75"D

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!

Whelen 600 Series LED Lighthead

$149.95 - $189.95

PRODUCT DESCRIPTION

600 SERIES SUPER-LED® LIGHTHEADS

Mid-sized surface mount, wide angle LEDs with redesigned spreader optic lenses fill the lighthead evenly with light, rivaling strobe in intensity but with all the advantages of LED.

LEDs are encapsulated for heavy-duty performance, vibration, moisture and corrosion resistance

Draws minimal current

Rated for 100,000 hours operation

14 flash patterns including steady burn

All lightheads are furnished with 6" pigtail

Dimensions

6-1/2" Long x 4-1/8" High, Protrudes 1-7/16".

No high voltage.

Super-LEDs are instant "On", no warm-up or high current voltage spikes on start up.

Priority 1 Series A1 LED Apparatus Light

$42.00

The Third Watch Priority 1 Series A1 Apparatus Light is Perfect for any Fire/Rescue truck or Ambulance. With it's sleek design it will go perfect on the side, front, or back of any apparatus!

134 Super Bright 0.25 Watt LED's per light head
12V or 24V
Chrome frame
Weather Proof
40 inches power wire

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!

Priority 1 Series A2 LED Apparatus Light

$70.00

The Priority 1 Series A2 LED Apparatus Light is one of our customers favorites. With it's sleek design it can go virtually anywhere on the apparatus. What makes our customers like this light the most is it's clear non color specifying lenses which make the design that much more versatile and sleek!

16 Super Bright 1 Watt LED's
12V
10''L X 8''T X 1 1/2''D
Weather Proof
Chrome Frame
40 inch power cord
Solid and Split Color Options

This product is made per order to the customers specifications. Shipping may be a few days longer than normal!