LAERDAL STIFNECK® SELECT
Skedco recommends the use of extrication collars in conjunction with the Oregon Spine Splint II (OSS) and considers the Laerdal Stifneck to be the finest on the market today. The Stifneck Select is adjustable, allowing one collar to fit a wide range of patient sizes from No-Neck to Tall. Secure locking mechanism and molded-in instructions increase ease of use. Fits in the OSS II carrying case and also in the extrication collar pocket on the CMC carrying case for the Miller Full Body Splint.
Junkin Safety Nec Loc Extrication Collar Kit JSA-20-05
Two piece design, with front piece locking strap allows for maximum support and stability. Maneuverable chin piece allows for airway maintenance without loss of immobilization. Can be easily applied, adjusted or removed in either sitting or supine positions with little movement. NEC LOC is constructed of rigid polyethylene plastic, has trachea opening, is X-Ray lucent and is available in four color coded sizes. Can be ordered individually or is available as kit of 4 units (1 ea. size) and is packed in a handy waterproof vinyl coated nylon storage case. Ideal for use in conjunction with JUNKIN VM Head and Neck Immobilizer.
SIZES
PEDIATRIC (RED) JSA-20-01
SMALL (YELLOW): JSA-20-02
MEDIUM (ORANGE): JSA-20-03
LARGE (LIGHT BLUE): JSA-20-04
Badger Collar - Single
Disposable, Quick, Easy, Comfortable, Lightweight. The Badger Collar is a True "no neck" collar with a simple twist and tear to fit application. The Badger Collar is made from Polyethylene and a Hylon HD Plastic Plug/ Fitting.
This product is intended to support cervical spine in a neutral position during transportation, in combination with other cervical and full body immobilization devices (CSID's and FBSID's).
Badger Collar Kit (3 Collars plus Carry Bag)
Disposable, Quick, Easy, Comfortable, Lightweight. The Badger Collar is a True "no neck" collar with a simple twist and tear to fit application. The Badger Collar is made from Polyethylene and a Hylon HD Plastic Plug/ Fitting.
This product is intended to support cervical spine in a neutral position during transportation, in combination with other cervical and full body immobilization devices (CSID's and FBSID's).
Junkin Safety Head Immobilizer JSA-363-BF
Instructions For Use
Attaching The Head Immobilizer To The Spine board
Make sure head immobilizer is taken apart. You should have 1 base plate, 2 head blocks and 2 head/chin straps. Place base plate against top of spineboard with attached straps stretched out. The straps attached to the base plate loop over and then through the handle running the strap in-between the board and the base plate. The run strap through and over other handle and attach strap to Velcro on base plate. Repeat with 2nd strap. Attach retention strap at top of base plate by looping through center hole of spine board. Attach head blocks to Velcro and place head/chin straps over blocks and loop Velcro ends through D rings on base plate.
Securing the patient in the Head Immobilizer
Position the patient on the backboard so that their head is positioned in the middle of the base plate. Secure the patient on the backboard with restraining straps. Place the head blocks against each side of the patients head. When possible align the holes in the head blocks with the patient's ears so you can hear the patient. Loop each end of the forehead/chin straps through the D rings. Tighten as needed.
The head immobilizer is vinyl coated and is both buoyant and waterproof.It can be left in place during X-rays.
20 Badger Collar 20 Collars Per Case
Disposable, Quick, Easy, Comfortable, Lightweight. The Badger Collar is a True "no neck" collar with a simple twist and tear to fit application. The Badger Collar is made from Polyethylene and a Hylon HD Plastic Plug/ Fitting.
This product is intended to support cervical spine in a neutral position during transportation, in combination with other cervical and full body immobilization devices (CSID's and FBSID's).
Badger Collar Kit (3 Collars plus Carry Bag) 6 Complete Kits
Disposable, Quick, Easy, Comfortable, Lightweight. The Badger Collar is a True "no neck" collar with a simple twist and tear to fit application. The Badger Collar is made from Polyethylene and a Hylon HD Plastic Plug/ Fitting.
This product is intended to support cervical spine in a neutral position during transportation, in combination with other cervical and full body immobilization devices (CSID's and FBSID's).