FENIEX TRITON 100W SPEAKER
Stand out with the Triton 100W: with a compact low-profile design and durable polycarbonate housing, its the ideal speaker for any police, fire or EMS vehicle. Uniquely engineered to achieve 85 degree sound dispersion, the Triton is a reliable choice for any first responder. Meets or exceeds SAE J1849 standards.
SPECIFICATIONS
- Impedance: 11 Ohms
- Neodymium Magnet
- Frequency Response: 600 - 2700Hz
INCLUDED
- 1x Triton Speaker
- 1x Universal Bracket
PRODUCT DETAILS
- Power rating: 100W
- 85 degree sound dispersion
- Compact design fits behind vehicle's grille or push bumper
- Rugged weather-resistant enclosure
- Universal siren compatibility
- Made in the USA
LEDQ Growler Low Frequency Tone Siren Intersection Clearing System
The LedEquipped Growler Low Frequency Tone Siren is an effective added layer of warning for intersections and high risk areas when used with your 100/200 watt siren amplifier. The Growler provides deep, low frequency tones, which are able to penetrate other vehicles, alerting drivers and pedestrians of your approach. Lower frequency reverberating tones are better able to penetrate other vehicles, alerting drivers to the presence of the oncoming emergency vehicle. The Growler is not a replacement to the vehicle’s primary siren. The Growler is an excellent add-on to any 100-200 watt warning siren. The Growler adds a minimum eight second penetrating burst of low frequency siren sound for use in heavy traffic, intersections or other high ambient noise conditions. Works with any sweeping tone, plus Hi/Low and electronic mechanical tone generated by the primary siren. The Growler low-frequency tones are synchronous with your primary siren tones to penetrate high noise, high traffic situations. The Growler Siren Amplifier module uses the primary siren speaker output wires and divides the frequency down to one of four tone styles. Built-in timer limits overexposure time to operator. Operators are advised to wear approved hearing protection. The unit comes standard with two separate external cancel controls. A positive or negative activation will cancel the tone. The Growler system includes speakers specifically designed for use with the Growler amplifier only. The Growler system will include one or two of these speakers depending upon the vehicle application.
- Add-on to any 100-200 watt warning siren & Improves emergency vehicle operator safety and siren effectiveness.
- Produces penetrating/vibrating low frequency sound waves able to penetrate vehicles.
- Works with any 100/200 watt emergency vehicle siren & Works with any sweeping tone, plus Hi/Low and electronic mechanical tone generated by the primary siren.
- Low Frequency siren sound can be activated via any emergency vehicle steering wheel horn ring– 8 second safety timer provides automatic tone shutdown.
- 3 year manufacturers defect warranty
- Dimensions 12 × 12 × 12 in
STAR D-44-16 Universal “L” bracket w/speaker
- Patented (Patent #8,265,320 B2 & D615,443 S)
- Ultra Compact Design - Only 3” deep
- Rugged glass filled nylon housing - will not rust!
- User replaceable rear facing driver
- Over 20 mounting bracket options available
- Acoustical & Environmental Requirements: SAEJ1849*, Title 13 Class A*
*Approved with SVP sirens (AMECA listed when used with 2 speakers)
- Output: 100 Watts
- Impedance: 11 ohm
- Decibels: 123db
- Dimensions: 6.6” x 6.6” x 2.9”
- Weight: 8 lbs. (with bracket)
- Acoustical & Environmental Requirements: SAEJ1849*
- Title 13: Class A*
- AMECA listed when used with 2 speakers*
*Approved with SVP sirens
Whelen Howler™ Low Frequency Tone Siren, HWLFE13
Low Frequency Tones for Intersections and High Risk Areas
Whelen's Howler system provides deep, low frequency tones, which are able to penetrate other vehicles, alerting drivers and pedestrians of your approach.
An effective added layer of warning when used with your 100/200 watt siren amplifier. The Whelen Howler consists of two low frequency speakers and an amplifier. The amplifier powers the 2 low frequency speakers and is installed in addition to installing a traditional 100/200 watt siren system.
The Howler is an add-on to any 100-200 watt warning siren such as the Whelen 295SL Series. Works with most Siren Amplifiers. Includes two speakers for use with Howler amplifier only. Howler is not a replacement to the vehicle's primary siren; Howler adds a minimum eight second penetrating burst of low frequency siren sound for use in heavy traffic, intersections or other high ambient noise conditions.
Features:
Works with any sweeping tone, plus Hi/Low and electronic mechanical tone generated by the primary siren.
The Howler low-frequency tones are synchronous with your primary siren tones to penetrate high noise, high traffic situations.
The Howler Siren Amplifier module uses the primary siren speaker output wires and divides the frequency down to one of three frequency bands via dip switch. Selections are 1/4 tone, 1/2 tone or a composite of 1/4 and 1/2 tones.
Lower frequency reverberating tones are better able to penetrate other vehicles, alerting drivers to the presence of the oncoming emergency vehicle.
Push on/push off button activates / deactivates the siren, allowing radio transmission to the vehicle without waiting for the unit to time out.
Built-in timer limits overexposure time to operator. Operators are advised to wear approved hearing protection.
Two separate external cancel controls, standard. A positive or negative activation will cancel tone.
Select tone duration and tone style via easy Scan-Lock™ feature and LED indicator. (selection of 8 different tone durations: 8-60 seconds maximum)
Size, Speaker without bracket: 7-1/4" (184mm) Dia. x 9" (229mm) L.
Size, Amplifier: 2-1/4" (54mm) H x 5" (127mm) D x 4-3/4" (120mm) L.
Weight: 8 lbs. (3.63kg).
Selecting tone duration and style is easy. Three LEDs located on the rear of the Howler amplifier provide a visual indication of the currently selected tone style during the configuration process. Using the Scan-Lock™ button, cycle through the three different tone styles. The currently selected style and tone can be identified by these LED indicators.